View our fantastic offers

compressor sales

Fini MICRO SE 2.210-200 Air Compressor

Free UK Shipping
Fini MICRO SE 2.210-200 Air Compressor
  Zoom
Our Price:  £2,718.00
List Price:  £5,487.60
Saving Of:  50%
(Inc. 20% VAT)
+

Delivery:  No charge

Availability:  

  

10 Meter PCL Vertex Coupling & Standard Adaptor 10mm Air Tool Hose10 Meter PCL Vertex Coupling & Standard Adaptor 10mm Air Tool Hose
Sealey Air Hose 5mtr x 8mm with 1/4''BSP Unions Heavy-DutSealey Air Hose 5mtr x 8mm with 1/4"BSP Unions Heavy-Dut
Sealey Air Leader Hose 600mm x 10mm with Tailpiece & 1/4Sealey Air Leader Hose 600mm x 10mm with Tailpiece & 1/4
Sealey Air Leader Hose 600mm x 8mm with Tailpiece & 1/4''Sealey Air Leader Hose 600mm x 8mm with Tailpiece & 1/4"
  (2 Reviews)


Fini MICRO SE 2.2-10 - 200 Automotive Screw Compressor

The Fini MICRO SE 2.2-10 - 200 Automotive Screw Compressor generates a high output suitable for continuous use. Its incorporation of the “Long life” POLY-V belt drive and simple controls make this compressor easy to maintain. The Fini MICRO SE 2.2-10 - 200 Automotive Screw Compressor is designed for long life, high output and continuous reliability along with extremely low noise levels. Available floor mounted, receiver mounted and with on board refrigerated dryer. The compact design and very quiet operation makes this compressor suitable for direct installations into the workshop environment.
Advanced cooling system - The deployment of the thermostatically controlled centrifugal fan reduces noise and saves energy. The compressor’s large surface area of the air and oil coolers ensure a cool operation and lower air outlet temperatures even at higher ambient temperatures.
Simple maintenance - All service items are located in one position with easy access reducing costs and down time. The compressor is supplied with Rotenergy PLUS synthetic coolant with longer intervals before changing and reduced friction and wear to components.

Fini MICRO SE 2.2-10 - 200 Automotive Screw Compressor Features:

  • POLY-V belt drive system - Providing three times the service life of normal V belts with much greater drive efficiency improving output and saving power.
  • High quality air - The MICRO SE 2.2-10 - 200 Automotive Screw Compressor is available with on board refrigerated dryer (ES models) ensuring dry compressed air benefits your system.
  • Long life and reliability - The MICRO SE 2.2-10 - 200 Automotive Screw Compressor benefits from state of the art manufacturing and over 50 years experience in the production of air compressors with most components designed and manufactured 'in house'
  • Flexible Range - 2.2 kW - 5.5 kW with freestanding cabinet or with 200 litre air receiver and with on board refrigerated dryer.
 

High efficiency Motors

The design of the MICRO compressors, including the high efficiency IE3 motors, has been fully focused on combining the different components that make up a perfect compressed air installation for a completely integrated, modular and functional system that combines maximum convenience with optimum energy efficiency.

 

Model:  F-V77JT72FNM701
Brand:  Fini
kW:  2.2
Hp:  3
L/Min:  290
m3/h:  17.4
c.f.m:  10.2
p.s.i.:  145
Bar:  10
dB (A):  58
Outlet G:  1/2"G
Receiver:  200Lt
Type:  Three Phase

Average Rating (2 Reviews):  
Write a Review and share your opinions!

Rating:  
Good Compressor
Tuesday, 28 February 2017  | 

We bought this large three phase compressor to power several tools in our workshop. Thanks for the great service.

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.


Response:

Thank you Mr Pendleton for you product review.


Rating:  
Bought compressor
Monday, 18 January 2016  | 

A good compressor and quiet for its size.

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.


Response:

Thank you for your feedback.

Rotary Screw Air Compressor Warranty Glossary  

1. Warranty Plan

2. Inclusions

3. Exclusions

4. Terms & Conditions


a. Standard Warranty – all new rotary screw compressors are offered with a standard 36 months’ warranty including parts and labour subject to conditions contained within points 2 and 3.

2.  Inclusions (what is included in the warranty)

a. Air End.
b. Main drive motor.
c. Integral Air Dryer.
d. Inverter.
e. Air/Oil Cooler.
f. Air/Oil separator vessel.
g. Cooling / Radial Fan.
h. Electronic Controller.
i. Pressure Transducer.
j. Temperature Sensor. 

3.  Exclusions (what is NOT included in the warranty)

a. Inverter Failures due to non-compliance with Inverter Service Bulletins as circulated and/or incorrect installation.
b. All routine service work and consumable service items.
c. Electrical component failure due to electrical installation or supply problems. WT&C8-16Screw
d. Normal wear and tear (fair wear and tear).
e. Accidental damage however caused.
f. Any consequential loss or costs whatsoever relating to a warrantable situation however caused.
g. Second ownership unless expressly agreed with FPS Air Compressors Ltd.
h. Faults arising from lack of maintenance or incorrect use.
i. Corrosion, paintwork and panels.
j. Any fault arising from poor ventilation or poor installation.
k. Faults arising due to the use of the machine outside of its design criteria.

4. Terms & Conditions

The standard or extended warranty (optional at extra cost) plans will be issued with FINI and Power System air compressors and will be subject to the following conditions:
a. The owner must maintain a service agreement and service the air compressor in conjunction with the recommended service schedules with the selling authorised distributor.
b. It is the responsibility of the owner of the machine to adhere to these terms.
c. A copy of the service records may be requested by FPS Air Compressors Ltd at any times.
d. All parts used within the warranty period must be genuine spare parts including RotEnergy46 lubricant, supplied by FPS Air Compressors Ltd only.
e. It is the responsibility of the owner to carry out due diligence when operating the equipment and to report any faults immediately. It is the responsibility of the owner to carry out the recommended daily checks inclusive of checking the lubricant levels and to observe all safety notices and/or norms.
f. The equipment must be installed correctly and commissioned by an authorised distributor following the guidelines for electrical supply and ventilation requirements. Electrical installation to be completed by qualified person.
g. The commissioning paperwork (COMMFPS04/14) must be returned to FPS Air Compressors Ltd upon installation.
h. The receipt of this document is MANDATORY.
i. Please be aware that the warranty is not valid unless the completed form (COMMFPS04/14) is returned and registered.
j. All warranty repairs must be authorised by FPS Air Compressors Ltd Warranty Department prior to the commencement of such works and repairs carried out by an authorised distributor only.
k. A sample of the air compressor lubricant may be requested by FPS Air Compressors Ltd at any time.
l. The warranty shall not be transferable unless agreed in writing with FPS Air Compressors Ltd, if agreed the machine must be re-commissioned with new paperwork at new site.
m. The shipment of spare parts to repair a reported fault will be sent free of charge, carriage paid from our head office on normal delivery.
n. If next day or same day delivery is requested the cost for this instruction will becharged to the distributor.   WT&C8-16Screw
o. FPS Air Compressors Ltd reserves the right to terminate any warranty agreement in case of any breach of these Terms and Conditions, or non-payment in advance of the Extended Warranty premium.
p. These conditions are provided in addition to the Standard Terms and Conditions of Sale, copies of which are available on request.

Spare Parts

i. The warranty period on components or spare parts supplied for machine warranty repairs will not exceed the remainder of the machines warranty period.
ii. Spare parts purchased from FPS Air Compressors Ltd carry a 3 months material defect replacement policy only and no labour or travel will be allowed for the replacement of parts supplied only as spare parts.  Spare parts that have been modified or used in a non-standard way are not covered by this warranty unless formally agreed in writing by FPS Air Compressors Ltd.
iii. Any failed spare part that has been used outside of its design criteria, damaged, misused, incorrect electrical/mechanical installation, low or no oil will be excluded from warranty replacement.
iv. Service items, lubricating oil and electrical components are excluded from spare parts warranty.

r. Additional Exclusions - FPS Air Compressors will not be held liable for any of the following:

i. Any consequential loss or costs whatsoever relating to a warrantable situation however caused.
ii. The supply and installation of any hire machines or equipment are excluded, these costs to be bourne by the distributor / customer.
iii. Hire equipment to carry out repairs.
iv. Out of hours working and/or accommodation.
v. Additional spares.
vi. Incorrect use of the equipment.

s. Transport Damage - All claims for damage in transit must be submitted to our head office immediately by telephone, email or fax. It is important that goods are checked before signing and where there is damage the delivery note must be signed by the recipient as “GOODS DAMAGED”. Any delivery note signed for in good condition or “unchecked” will be refused. Where possible please supply photographic evidence of transport damage.

 

 


CUSTOMERS ALSO VIEWED
Sealey Air Leader Hose 600mm x 8mm with Tailpiece & 1/4''

Sealey Air Leader Hose 600mm x 8mm with Tailpiece & 1/4"£7.90   £6.31

600mm Rubber hose for use between air tool and supply point. Supplied with tailpiece and 1/4"BSP female union.

Sealey Air Leader Hose 600mm x 10mm with Tailpiece & 1/4

Sealey Air Leader Hose 600mm x 10mm with Tailpiece & 1/4£11.40   £10.26

600mm Rubber hose for use between air tool and supply point.
Supplied with tailpiece and 1/4"BSP female union.

Sealey Air Hose 5mtr x 8mm with 1/4''BSP Unions Heavy-Dut

Sealey Air Hose 5mtr x 8mm with 1/4"BSP Unions Heavy-Dut£14.95   £11.92

Rubber alloy air hose fitted with 1/4"BSP female swivel unions.

Sealey Air Hose 5mtr x 8mm with 1/4''BSP Unions Extra Hea

Sealey Air Hose 5mtr x 8mm with 1/4"BSP Unions Extra Hea£19.45   £15.52

High quality rubber air hose fitted with female 1/4"BSP swivel unions.

Sealey Air Hose 5mtr x 10mm with 1/4''BSP Unions Heavy-Du

Sealey Air Hose 5mtr x 10mm with 1/4"BSP Unions Heavy-Du£21.54   £19.39

Rubber alloy air hose fitted with 1/4"BSP female swivel unions.

Sealey Air Hose 10mtr x 8mm with 1/4''BSP Unions Heavy-Du

Sealey Air Hose 10mtr x 8mm with 1/4"BSP Unions Heavy-Du£24.45   £19.50

Manufactured to EN 5774. Rubber alloy air hose suitable for garage or bodyshop applications.

7.5 meter Polyurethane Airline Recoil (10mm) Blue

7.5 meter Polyurethane Airline Recoil (10mm) Blue£25.26   £22.80

Hose recoils to a fraction of its working length.
 

7.5 meter Polyurethane Airline Recoil (10mm) Red

7.5 meter Polyurethane Airline Recoil (10mm) Red£25.26   £22.80

Protect tool ends and leaves the work area clear of hazards.

Sealey PU Coiled Air Hose 10mtr x 6mm with 1/4''BSP Union

Sealey PU Coiled Air Hose 10mtr x 6mm with 1/4"BSP Union£25.74   £23.17

Polyurethane recoil type hoses fitted with 1/4"BSP swivel unions and metal hose end guards.
 

Sealey Air Hose 5mtr x 10mm with 1/4''BSP Unions Extra He

Sealey Air Hose 5mtr x 10mm with 1/4"BSP Unions Extra He£26.94   £24.25

High quality rubber air hose fitted with female 1/4"BSP swivel unions.

Sealey Air Hose 10mtr x 8mm with 1/4''BSP Unions Extra He

Sealey Air Hose 10mtr x 8mm with 1/4"BSP Unions Extra He£31.95   £25.48

High quality rubber air hose manufactured to EN 2398.

Sealey Air Hose 15mtr x 8mm with 1/4''BSP Unions Heavy-Du

Sealey Air Hose 15mtr x 8mm with 1/4"BSP Unions Heavy-Du£33.95   £27.07

Rubber alloy air hose fitted with 1/4"BSP female swivel unions.

Cages